Lutron 3-Way Switches: Caseta Wireless vs Wired Options

Best for
Wired 3-way with Diva smart or Claro smart

Best for
Dimmable setup lights in older homes

Best for
Smart on/off for lights and ceiling fans

The Lutron Caseta Smart Light Switch is the classic Lutron Caseta smart switch for on/off control of lights and ceiling fans. Through the Lutron app and Smart Hub (sold separately), you get scenes, schedules, sunrise and sunset timing, geofencing and a Smart Away mode that varies lights while you are traveling. It is certified for Apple Home, Amazon Alexa and Google Assistant.

For Lutron Caseta 3-way control, the listing says to pair it with a Pico remote or a second Caseta switch, adding 3-way, 4-way or multi-location control without new wiring. It requires a neutral wire. Load figures are inconsistent: the features cite up to 600W bulbs and fans up to 6A, while the description cites 720W incandescent and 3.6A fans, so check the instructions before connecting a heavy load. It suits someone who wants the gaming room fan and lights on a schedule or a voice command.

• On/off control for lights and ceiling fans
• 3-way with Pico remote or second Caseta switch
• Smart Away, geofencing and schedules via hub
• Neutral wire required

The Lutron Caseta Smart Dimmer Switch is the Lutron Caseta dimmer, and its biggest advantage is that no neutral wire is required, so it fits older homes. It turns the existing dimmable bulbs on a circuit into smart lights, and it connects with Alexa, Apple HomeKit, Google Home, Ring and Sonos through the hub. The listing says the Lutron Smart Hub works without Wi-Fi for fast, stable control.

For 3-way, add a Pico remote (not included); the listing says you can build a wireless switch setup with up to 10 devices. Installation is quoted at as little as 15 minutes. Dimming is the draw for setups: drop the room lights to cut monitor glare during a match, then bring them up for a stream. It suits most people starting with Lutron’s smart lighting.

Best for
Garage or porch lights, classic Claro look

The Lutron Caseta Claro Smart Switch & Wallplate brings smart on/off control in Lutron’s Claro design and includes a coordinating wallplate. It works with 5A lighting or a 3A fan, requires a neutral wire and needs the Lutron Smart Hub, model L-BDG2-WH. The listing specifically suggests it for garage and outdoor porch lights.

For 3-way, you can mount a Pico remote with a wall bracket (PICO-WBX-ADAPT, sold separately) or replace an existing 3-way switch by mounting the Pico over the backbox. Smart features include seasonal schedules and Smart Away. It is also one of the two switches that the Claro accessory switch below is built to pair with, although this listing does not state its model number. It suits anyone who wants a smart switch that looks like a traditional rocker.

Best for
Simple non-smart LED dimming

The Lutron Diva LED+ Dimmer Switch is the only non-smart product here: no hub, no app, just a paddle dimmer with a slide control and a trim lever for fine-tuning LED dimming. It supports single-pole or 3-way installs, handles up to 150W of dimmable LED/CFL or 600W of incandescent/halogen, and does not require a neutral wire.

For the Lutron Diva LED+ 3-way question, the listing’s circuit type reads “3-way with Claro switch”, but it does not specify which Claro switch model to pair with it, so check the instructions before buying. Lutron says its dimming reduces flicker, buzz and delay, which matters when you record video under LED lights. It suits anyone who wants good dimming without smart features.

• Paddle on/off with slide dimmer
• Trim lever to fine-tune low end
• 150W LED/CFL or 600W incandescent
• No neutral required

The Lutron Caseta Smart Claro Accessory Switch is the Lutron Claro accessory switch for wired 3-way and multi-location runs, and it does not work alone. It pairs only with the Diva smart dimmer (DVRF-6L-WH-R) or the Claro smart switch (DVRF-5NS-WH-R), both sold separately, and supports up to 10 accessory switches. It does not work with the original Caseta dimmer or switches (PD-6WCL and PD-5ANS/PD-6ANS).

With a Diva smart dimmer, tap once for your preset level, twice for full on, or press and hold for a slow fade to off. It needs no neutral wire and does not count toward the hub’s device limit. Wallplate sold separately. It suits people who already have 3-way wiring and prefer a physical switch at the second location instead of a Pico.

Best for
Hands-free lights in halls and closets

The Lutron Motion Sensor Light Switch is the Lutron motion sensor switch for 3-way-capable rooms where you want lights to handle themselves. Occupancy mode turns lights on and off automatically, while Vacancy mode needs a manual on and turns off automatically, with a delay of 1, 5, 15 or 30 minutes. It senses daylight and learns your preferred light level so lights stay off in a bright room.

The description says it senses motion up to 30 feet with coverage for 900 square feet and uses Advanced XCT sensing to detect subtle motion like reading. Loads include 600W incandescent, halogen and ELV, 450W MLV, 360W CFL/LED, 5A ballasts or 3A fans. The title says 3-way and the circuit type says multi-location, but the listing does not explain the 3-way wiring. It is not a smart or app-controlled switch. It suits hallways, closets and a garage workshop. For more on this category, see our Lutron occupancy sensor switch guide.