Kasa 2-Gang Smart Switch and Its Best Alternatives
Every figure on this page is quoted from the Amazon listing for that model. Scores are the average rating Amazon buyers left. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
The Kasa smart switch 2 gang model, the HS200-2, puts two smart switches in a single flush unit, so you can control two separate light circuits from one wall box. Before you buy, check one thing: it needs a neutral wire, along with 2.4 GHz Wi-Fi. If your wall box has a neutral and you want on/off control of two circuits, it is the straightforward pick.
This Kasa smart switch comparison covers three products that approach a smart room from different angles. The HS200-2 handles two light circuits, the Kasa Matter smart dimmer KS225 adds adjustable brightness and broad platform support for a single circuit, and the Kasa KP200 in-wall outlet makes plugged-in lamps and gear controllable. For a gaming room or home theater where lights and devices should react to your scenes and routines, the right answer may be one of them or a mix.
JOB SHEET
Which Kasa Switch Should You Buy
- Two light circuits at one wall box, on/off only: Kasa Smart Switch 2-Gang HS200-2
go to no. 01 - One circuit where you want dimming and multi-platform control: Kasa Matter Smart Dimmer KS225
- Lamps, LED strips or devices plugged into the wall: Kasa Smart Plug KP200 in-wall outlet
go to no. 03 - A room that needs dimmable overheads and smart outlets: pair the KS225 with the KP200
No. 01
of 3
Kasa Smart
Kasa Smart Switch 2-Gang
4.7
out of 5
Amazon buyer average
Well rated
4.6 or better out of 5 on Amazon
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Two light circuits in one wall box
Pros
- Two switches in one flush unit
- 15 A rating
- Schedules, timers and Away Mode
- App-guided install
Cons
- Neutral wire required
- No dimming
The Kasa Smart Switch 2-Gang model, the Kasa HS200-2, combines two switches in one flush-looking unit so you can control two different circuits. Think of a room with ceiling lights on one circuit and a fan or accent lights on another: instead of two separate smart switches in a double box, this one unit handles both. It is a single pole switch, meaning each circuit is controlled from one location, and the listing says you do not need to worry about master and auxiliary switch configurations.
Setup is guided by the Kasa app (the listing also mentions the Tapo app), and it needs a neutral wire plus a 2.4 GHz Wi-Fi connection. It is rated for 15 A at 120 volts with screw terminals, and the description says the terminals are interchangeable and the switch is built with UL-certified, flame-retardant materials. The listing recommends consulting an electrician if you are unfamiliar with electrical wiring, which is sound advice for any in-wall device.
Once installed, you get app control from anywhere, voice control through popular assistants and SmartThings, timers and countdown schedules, device grouping, scenes and Away Mode, which switches lights on and off randomly to make the home look occupied. What you do not get is dimming. If you want lights that fade down for a movie or a late-night session, the KS225 is the better fit, though it controls only one circuit.
- Two independent switches in one flush unit
- 15 A rating at 120 volts
- Schedules, timers, scenes and Away Mode
- Neutral wire and 2.4 GHz Wi-Fi required
No. 02
of 3
Kasa Smart
Kasa Matter Smart Dimmer Switch
4.4
out of 5
Amazon buyer average
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Adjustable lighting for gaming and movie scenes
Pros
- 1-100% dimming
- Matter with Multi-Admin
- LAN control when offline
- Siri, Alexa and Google voice control
Cons
- Neutral wire required
- Single gang only
The Kasa Matter Smart Dimmer Switch, model KS225, is the pick when brightness control and platform flexibility matter more than a second gang. It dims from 1 percent to 100 percent, and you can adjust it by sliding a finger on the switch, through the app, or by voice. For a gaming setup, that means you can drop the overheads to a low glow without turning them off completely.
Matter certification is the other big draw. The listing says it works across Apple Home, Alexa, Google Home and SmartThings, with Multi-Admin letting you control it from several systems at once. LAN control keeps it working locally even when your internet is down, which is a real plus for reliability. Voice control is listed through Siri, Alexa and Google Assistant, and it keeps the same schedules, timers and Away Mode features as the HS200-2.
Like the 2-gang switch, the KS225 needs a neutral wire and 2.4 GHz Wi-Fi, and it fits a standard wall plate. Its current rating is listed at 2.5 A, much lower than the HS200-2’s 15 A, which is typical of dimmers designed for lighting loads rather than general switching. It is a single-gang device, so if you need two circuits in one box, the HS200-2 is still the answer. The listing does not specify which bulb types are compatible, so check that your fixtures are dimmable before installing.
- 1 to 100 percent dimming range
- Matter support with Multi-Admin
- LAN control that works offline
- Neutral wire required, standard wall plate size
No. 03
of 3
Kasa Smart
Kasa Smart Plug KP200
4.1
out of 5
Amazon buyer average
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Smart control of plugged-in lamps and gear
Pros
- Two independently controlled outlets
- 1875W max total
- Grouping and Away Mode
- Frees up floor space
Cons
- Controls outlets, not wired lights
- Wiring needs not stated in listing
The Kasa Smart Plug KP200 is an in-wall Wi-Fi outlet rather than a light switch. It gives you two smart outlets that you can control together or individually, which makes it a strong alternative when the lights you care about are lamps, LED strips or other gear that plugs in rather than hard-wired fixtures. Because it lives in the wall, it takes up less space than plug-in adapters.
The feature set mirrors the switches: app control from anywhere, schedules and scenes, grouping, Away Mode and voice control through Alexa or Google Assistant, with a unique name for each outlet. The listing gives a total power rating of 1875W max, a 15 A current rating at 125 volts and an operating temperature range of 32°F to 104°F. It does not specify whether a neutral wire is needed or which Wi-Fi band it uses beyond IEEE 802.11, so check the product box and installation guide before buying.
The KP200 suits anyone building a controllable room around plugged-in devices, such as a desk lamp, a light bar behind a monitor or a speaker you want to shut off on a schedule. It does not control ceiling lights on a wall switch circuit; for that, choose the HS200-2 or KS225.
What Sets These Models Apart
| Model | Type | Controls | Neutral wire |
|---|---|---|---|
| HS200-2 | 2-gang on/off switch | Two light circuits | Required |
| KS225 | Dimmer switch with Matter | One light circuit, 1-100% | Required |
| KP200 | In-wall smart outlet | Two plugged-in devices | Not specified |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for Kasa Smart Switches
Check your wiring first. The Kasa smart switch neutral wire requirement applies to both the HS200-2 and the KS225. A neutral is usually a white wire bundled at the back of the wall box, but older homes do not always have one at the switch location. If you are not sure, or if you are not comfortable working with electrical wiring, the listing’s advice to consult an electrician is worth following. For more single-gang options, our guide to the Kasa wall switch lineup covers other layouts.
Next, decide what you want to control. Hard-wired overhead lights need a switch. Lamps and plugged-in gear need an outlet. Dimming requires both a dimmer switch and dimmable bulbs. For a gaming room, a common setup is a dimmer on the overhead lights and a smart outlet for accent lighting, all grouped into one scene in the Kasa app.
Finally, think about how you will trigger scenes. App and voice control cover most needs, and schedules handle routine on and off times. If you want a physical control that sits on your desk, a Kasa smart button can add a tap-to-trigger option.
FAQ
Does the Kasa HS200-2 need a neutral wire?
Yes. The listing states that a neutral wire is required, along with a 2.4 GHz Wi-Fi connection.
Can the Kasa 2-gang smart switch dim lights?
No. The HS200-2 is an on/off switch. For dimming, the KS225 offers a 1 to 100 percent range on a single circuit.
Does the Kasa KS225 work without internet?
The listing says it supports LAN control, so it can keep operating locally when your internet connection is down.
Can the Kasa KP200 control both outlets separately?
Yes. You can control the two outlets together or individually, and give each a unique name for voice commands.
Is the HS200-2 a 3-way switch?
No. It is listed as single pole, so each circuit is controlled from one location.
Which Kasa switch should I buy for a gaming room?
If you want adjustable overhead lighting, choose the KS225. If you have two circuits in one box, choose the HS200-2. For lamps and plugged-in gear, the KP200 fits best.
