Which CRAFTSMAN V20 Drill Kit Should You Build With?
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
For most people shopping for a CRAFTSMAN V20 drill to assemble a desk, mount a monitor arm or hang shelving above a setup, the CMCK201D1 drill and impact driver kit is the best all-round pick, because the impact driver handles long screws and lag bolts that make a regular drill struggle. If you only need to drill, the brushless CMCD713C2 is the stronger single tool, and the renewed CMCD700 is the lighter-duty option for occasional use.
This CRAFTSMAN drill comparison covers three kits. The CMCK201D1 pairs a CMCD702 drill/driver with a CMCF801 impact driver and one 2Ah battery. The CMCD700C1R is a renewed single drill with a 1.3Ah battery. The CMCD713C2 is a CRAFTSMAN V20 brushless drill kit with two 2.0Ah batteries. We compared listings, specifications and intended use; we did not run these drills ourselves, and we note where the listings contradict themselves.
JOB SHEET
Which CRAFTSMAN Cordless Drill Should You Buy
- Building furniture and driving lots of screws: CRAFTSMAN V20 Cordless Drill set with impact driver.
go to no. 01 - Light, occasional jobs where a renewed tool is fine: CRAFTSMAN CMCD700C1R 20V 1 2 in. drill kit.
go to no. 02 - Longer sessions, more drilling and a spare battery: CRAFTSMAN RP+ Cordless Drill Driver Kit.
go to no. 03 - Already own V20 batteries and want the most capable drill: CRAFTSMAN RP+ Cordless Drill Driver Kit.
go to no. 03
No. 01
of 3
Craftsman
CRAFTSMAN V20 Cordless Drill
8.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Desk builds and mounting with lots of screws
Pros
- Drill plus impact driver
- Up to 1,800 in-lbs impact torque
- LED on both tools
- Bits and storage bag included
Cons
- Only one 2Ah battery
- Brushed drill, not brushless
The CRAFTSMAN V20 Cordless Drill set, model CMCK201D1, is the CRAFTSMAN drill and impact driver kit in this lineup, and the one that makes the most sense for setup builders. You get two tools: the CMCD702 1/2-inch drill/driver, rated at up to 1,700 RPM and 300 unit watts out, and the CMCF801 1/4-inch impact driver, rated at up to 1,800 in-lbs of max torque. The listing says the drill manages up to 90 holes per charge and the impact driver up to 120 fasteners per charge.
Why the impact driver matters: a drill spins, but an impact driver adds rapid rotational blows when it meets resistance. That makes it far better at sinking long wood screws into a desk frame, lag bolts into a stud for a wall-mounted TV bracket, or deck screws outdoors, with less strain on your wrist. Keep the drill for making holes and the impact driver for fastening, and you avoid constant bit swapping mid-build.
The kit includes one CMCB202 2Ah battery, a CMCB101 charger, a double-sided bit tip, a PH #2 screwdriving bit and a storage bag. Both tools have an LED and are VersaTrack compatible, though VersaTrack accessories are sold separately. The single battery is the main limitation: you can only run one tool at a time without buying another. The listing does not specify whether the drill motor is brushless, and the brushless marketing sits only on the CMCD713C2. The listed weight of 7.4 pounds covers the whole kit rather than a single tool, so do not read it as the weight in your hand.
- CMCD702 drill/driver up to 1,700 RPM
- CMCF801 impact driver up to 1,800 in-lbs max torque
- One 2Ah battery and charger included
- LED lights on both tools
No. 02
of 3
Craftsman
CRAFTSMAN CMCD700C1R 20V 1 2 in.
9.6
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Occasional light-duty jobs on a tight budget
Pros
- Two-speed 0-350/0-1,500 RPM
- 1/2-inch keyless chuck
- Charger included
- Amazon Renewed Guarantee
Cons
- Small 1.3Ah battery
- Renewed, not new
The CRAFTSMAN CMCD700C1R 20V 1 2 in. drill driver kit is an Amazon Renewed product, meaning it was returned or traded in, then inspected and tested by an Amazon-qualified supplier. The listing says renewed items are covered by the Amazon Renewed Guarantee for replacement or refund if you are not satisfied. That is the key context: this is a pre-owned CRAFTSMAN CMCD700, not a new tool.
On paper it is a simple, capable drill. It has a two-speed gearbox with 0-350 and 0-1,500 RPM ranges, a 1/2-inch keyless chuck, an LED work light and 280 unit watts out. The included 20V MAX lithium battery is rated at 1.3Ah, and the charger is listed at 60 minutes or less. It is VersaTrack compatible for hanging on a wall rail. The low gear is the one to use for driving screws, since slower rotation gives you more control and less chance of stripping a screw head in soft particleboard.
One figure looks wrong: the spec table lists maximum torque as 40 in-lb, which is unusually low for a 20V drill and sits oddly next to the 280 unit watts figure. We would not rely on it either way. The small 1.3Ah battery also means shorter runtime than the 2Ah packs in the other kits. This drill suits someone assembling the occasional flat-pack shelf or gaming chair who wants a real cordless drill in the drawer rather than a manual screwdriver.
No. 03
of 3
Craftsman
CRAFTSMAN RP+ Cordless Drill Driver Kit
9.8
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Heavier drilling and longer work sessions
Pros
- Brushless motor
- Up to 1,900 RPM
- Two 2.0Ah batteries
- Ratcheting 1/2-inch chuck
Cons
- No impact driver in kit
- Listed wattage figures differ
The CRAFTSMAN RP+ Cordless Drill Driver Kit, model CMCD713C2, is the CRAFTSMAN V20 brushless drill in this lineup. Brushless motors skip the carbon brushes found in brushed designs, which generally means less friction, less heat and longer runtime. CRAFTSMAN says this one gives up to 25% more runtime and improved durability, and produces 350 unit watts out.
It has the fastest top speed here, with a two-speed gearbox covering 0-600 and 0-1,900 RPM, plus a 1/2-inch ratcheting chuck for better bit retention and an LED light. The kit includes two V20 2.0Ah batteries and a charger, so you can keep one charging while you work. The spec table lists maximum power as 340 watts while the feature list says 350 unit watts out; the difference is small, but worth knowing the numbers do not match exactly.
This kit suits someone doing more drilling than fastening: running cable holes through a desk, building a wall-mounted shelf system, or working on larger home projects. It gives way to the CMCK201D1 if you drive a lot of long screws, since there is no impact driver here. Because it runs on the V20 platform, those two batteries also power other CRAFTSMAN V20 tools, such as a 20V cordless sander for smoothing a custom desktop.
- Brushless motor with up to 25% more runtime
- Two speeds, up to 1,900 RPM
- 1/2-inch ratcheting chuck
- Two 2.0Ah V20 batteries included
What Sets These Models Apart
| Kit | Tools | Top drill speed | Batteries |
|---|---|---|---|
| CMCK201D1 | Drill/driver and impact driver | 1,700 RPM | One 2Ah |
| CMCD700C1R (renewed) | Drill/driver | 1,500 RPM | One 1.3Ah |
| CMCD713C2 | Brushless drill/driver | 1,900 RPM | Two 2.0Ah |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for CRAFTSMAN Cordless Drills
Start with the job. If most of your work is assembly, a drill and impact driver pair saves time and effort, which is why the CMCK201D1 fits desk and furniture builds so well. If most of your work is making holes, prioritize drill speed and battery runtime, where the CMCD713C2 leads. Think about the projects coming up in the next year too: a monitor wall mount, a floating shelf for consoles and a new desk frame are all fastening-heavy jobs.
Next, count batteries. A single battery is fine for short jobs, but two let you swap and keep going. Every kit here uses 20V packs, so batteries bought for one tool work across the lineup. That also matters if you plan to add more V20 tools later, like a 20V cordless shop vacuum for cleaning up sawdust around your setup.
Finally, weigh renewed against new. The CMCD700C1R is backed by the Amazon Renewed Guarantee, but it comes with the smallest battery and the lowest speeds. For light, occasional use it is reasonable; for regular projects, a new kit with 2Ah batteries is the more comfortable choice. Whatever you pick, check the chuck: a ratcheting chuck like the one on the CMCD713C2 grips bits more firmly, while a keyless chuck is simply quick to change.
FAQ
Which CRAFTSMAN drill is best for building a gaming desk?
The CMCK201D1 kit is the best fit, because its impact driver handles long screws and bolts while the drill handles pilot holes.
Is the CMCD713C2 brushless?
Yes. The listing describes a brushless motor that provides up to 25% more runtime and improved durability.
Is the CMCD700C1R new?
No. It is sold through Amazon Renewed, meaning it is pre-owned or refurbished, inspected and tested, and covered by the Amazon Renewed Guarantee.
Do these kits share batteries?
All three are 20V CRAFTSMAN kits, and the CMCD713C2 listing states it is part of the V20 system. The CMCK201D1 uses a V20 2Ah battery as well.
What does an impact driver add over a drill?
An impact driver delivers rapid rotational blows under load, which makes it better at driving long screws and lag bolts. The CMCF801 in the CMCK201D1 kit is rated up to 1,800 in-lbs of max torque.
How many batteries come with each kit?
The CMCK201D1 includes one 2Ah battery, the CMCD700C1R includes one 1.3Ah battery, and the CMCD713C2 includes two 2.0Ah batteries.
