Bosch Table Saw Parts Matched to Your Saw Model

Best for
Bosch 4100 owners with worn height gears

The 2610996896 Toothed Gear for Bosch 4100 saws is made by Axfvd, not Bosch. It carries the Bosch part number 2610996896 for reference and lists fit with the Bosch 400, 4100, 4100DG-09 and 4100XC table saws. According to the listing, each package holds two gears, though the specification field shows a package quantity of 1, so check the count on arrival.

These gears sit in the blade height and angle adjustment mechanism. When teeth wear or strip, the crank spins without the blade moving smoothly, and swapping the gear restores control. The gears are plastic and weigh 2.89 ounces for the package. The listing calls the material high strength but gives no data beyond that. It suits 4100 owners who want an affordable fix and accept a third-party part. If you prefer genuine Bosch parts across the board, confirm availability of the OEM gear through Bosch service instead.

Best for
4000 and 4100 owners wanting cleaner cuts

The Bosch TS1005 Zero Clearance Insert Assembly is a red throat plate for the 4000 and 4100 series table saws. A zero clearance insert replaces the stock plate so the opening around the blade is only as wide as the blade itself. As general shop knowledge, that support right at the cut line reduces tear-out on the bottom face of plywood and stops thin offcuts from dropping into the saw.

The listing says it is meant for precision cuts at 90 degrees and reduces kerf clearance to the thickness of the blade, which also means it is not meant for bevel cuts. It measures 13.75 x 3.75 x 0.5 inches, weighs 4 ounces and is made in Taiwan. Some specification fields, such as 30 teeth, 3.7 watts and a corded electric power source, clearly do not apply to an insert and look like data errors. It suits any 4000 or 4100 owner doing furniture or cabinet work where clean edges matter. Pair it with a fine-tooth 10 inch table saw blade for the cleanest results.

• Fits 4000 and 4100 series saws
• Reduces kerf clearance to blade thickness
• For 90-degree cuts

Best for
GTS1031 owners with broken handwheels

The Bosch 2610015069 Handwheel Replacement Part comes as a two-pack of genuine handwheels for the Bosch GTS1031 table saw. The description says they are made of durable plastic, mount to the saw’s front panel and control the blade angle adjustment.

The listing is clear on fit: GTS1031 only, and Bosch advises checking the tool manual before purchase. The pack weighs 4.8 ounces and the origin of manufacture and packaging may vary. Oddly, the brand field reads BoschHomeAppliances, but the manufacturer is listed as Bosch and the part number matches. It suits GTS1031 owners with a cracked or missing wheel, and the spare in the pack is handy for later. Owners of the 4100 family should look at the parts diagram for their own saw instead.

Best for
Owners who confirmed 2610008538 in their manual

The Bosch Parts 2610008538 Switch is sold as an OEM authorized replacement part, part number 2610008538, made in the United States. That is the useful information. The listing says only that it fits “various Bosch Parts models” and does not name a single saw.

The specification block describes a wall-mounted push-button X-10 switch for lights and home automation systems, which is almost certainly a data error rather than a description of a table saw power switch. Treat this listing strictly as a part-number match: if your saw’s parts diagram lists 2610008538 for the switch, this is the right part. If you cannot confirm that number, do not order on the title alone. A faulty power switch is also a safety issue, so unplug the saw and follow the manual when replacing it.

Best for
Owners replacing a damaged rip fence

The Bosch Parts 2610950148 Rip Fence Assembly is an OEM authorized, complete metal fence assembly from Bosch Service Parts. It measures 29 x 7 x 5 inches and weighs 5.12 pounds, and the listing says it is made in the United States.

Like the switch, the listing names no specific saw and only says it fits various Bosch models, so the part number is your only guide. A rip fence that no longer locks parallel to the blade is a leading cause of burned edges and kickback, so replacing a bent or damaged fence is a worthwhile repair. It suits owners whose manual lists 2610950148. If you are weighing a repair against replacing an aging saw, our jobsite table saw roundup covers current options.

• Complete rip fence assembly
• Metal construction
• OEM part number 2610950148

Best for
GCM12SD miter saw owners needing brushes

The Bosch 2610997207 Brush Set is titled as a pair of carbon brushes for the GCM12SD miter saw, not a table saw. We include it because shoppers searching for Bosch table saw parts often land on it, and because the description’s compatibility list is broader: it names several miter saws and also the 4000 and 4100 series worksite saws, including the 4100DG-09 and 4100-09.

The listing conflicts with itself on quantity, with the title saying pair and the description saying one carbon brush, bulk packed. Several spec entries, like 80 teeth and keyless blade change, belong to a saw rather than a brush. If your table saw’s manual lists 2610997207 for its motor brushes, this may be the right part, but confirm the number first and expect to verify the quantity. For miter saw owners with a GCM12SD, it is the straightforward choice.