YesWelder Welding Magnets: Fixed Arrow, Switchable or Adjustable?

Best for
Odd angles and pipe fit-up

The YESWELDER Adjustable Angle Welding Magnet 20-200° is the problem solver in this lineup. Instead of fixed faces, it has a hinged body that sets anywhere from 20 to 200 degrees, with a printed scale so you can dial in a specific angle. Once set, you lock it with the included hex wrench, so the joint does not creep while you tack.

The listing rates it at up to 77 lb, or 35 kg, of holding force, and names welding, soldering, marking off and pipe installation as intended uses. That range of angles makes it a natural fit for projects like a gaming desk frame with splayed legs, a monitor arm bracket, or roll-cage style bracing, where a 60 or 120 degree joint shows up often. The listing also warns not to weld too close to the magnet itself, which is sound advice for any welding magnet since heat can weaken magnets.

• Adjustable 20 to 200 degree range with a scale
• Up to 77 lb holding force, medium size (model AJM-M)
• Iron body, red finish, 15.8 ounces
• Hex wrench included to lock the set angle

It suits fabricators who build to drawings with non-standard angles. It gives way to the arrow magnets for everyday square joints, where a fixed face is faster to place, and it has no on/off switch, so removal takes a firm pull.

Best for
Beginners building a first fixture kit

The YESWELDER 25 lb and 50 lb listing is actually a six-piece set: two 25 lb, two 50 lb and two 75 lb arrow magnets. Each uses the classic arrow shape with faces at 45, 90 and 135 degrees, which covers the majority of square frames, corner joints and simple bracing.

The appeal here is range. Light 25 lb magnets are easy to position and release on thin tube or sheet, while the 75 lb pieces grip thicker stock. Having pairs of each lets you hold both sides of a joint or square up two corners at once. None of these magnets have an on/off switch, so you remove them by pulling or levering them off the work. If you are just getting started, pairing a set like this with a hobby machine such as a YesWelder MIG welder gives you a practical first setup.

• 2 x 25 lb, 2 x 50 lb and 2 x 75 lb magnets (model KY1101)
• 45, 90 and 135 degree holding faces
• Iron construction
• Intended for fit-up, assembly and workpiece positioning

This set suits beginners and hobbyists who want coverage across light and medium work. It gives way to the switchable magnets when you reposition parts often, and to the 176 lb switchable magnet on heavy plate. The listing does not specify individual magnet weights or dimensions.

Best for
Frequent repositioning on medium stock

The YESWELDER Switchable Arrow Welding Magnet 2 pack gives you two arrow magnets with an on/off switch. Flip the switch off and the magnetic field releases, so you can slide the magnet into exact position, then turn it on to lock the part. That makes a noticeable difference to workflow when you move magnets dozens of times per project.

The title describes the magnets as 66 to 110 lb, while the features and specifications give a maximum of 110 lb, or 50 kg. The listing does not explain what the 66 lb figure represents, so treat 110 lb as the top rating rather than a guaranteed hold on every surface. Like the fixed set, they hold at 45, 90 and 135 degrees.

• Two switchable magnets per pack (model SWM-M 2pk)
• Up to 110 lb pull force
• On/off switch for attach, remove and reposition
• 45, 90 and 135 degree arrow faces

This is the pick for workbench, cart and frame builders who value speed. It gives way to the six-piece set if you want more pieces for the money spent, and to the 176 lb model when parts get heavy.

Best for
Heavy plate and big frames

The YESWELDER Switchable Welding Magnet is the strongest option here at up to 176 lb, or 80 kg, of holding force. It is sold as a single piece and uses the same arrow layout with 45, 90 and 135 degree faces, plus the on/off switch for clean release.

At 6.89 x 4.37 x 1.02 inches and 2.97 pounds, it is a noticeably larger, heavier tool than the others. That size is an advantage on thick plate, trailer tongues and big fixture tables, where a small magnet would let the part shift. On light tube it is more magnet than you need. Welders running bigger machines, such as the ones covered in our multiprocess welders roundup, tend to reach for this class of holder.

• Up to 176 lb holding force (model WM12-L)
• On/off switch
• Iron body, red finish
• Single magnet per package

It suits heavy fabrication. It gives way to the two-pack switchable when you need two magnets on the same joint and your stock is lighter.