Ubiquiti PoE+ Injectors: Matching Power and Speed to Your Access Point

The UBIQUITI POE Injector, model U-PoE-AT, is the straightforward PoE+ answer for U6 owners. It delivers up to 30W of 802.3at power, and the listing names the U6-LR, U6-Lite and U6-Pro as compatible. It includes surge and clamping protection and an AC cable with earth ground, which matters if your access point hangs on a ceiling with a long cable run.

The description also mentions Ubiquiti cameras as supported devices. It is a single-port unit measuring 1.97 x 4.72 x 3.15 inches, with a 1-year warranty. The listing does not specify its data rate, so if you are feeding a multi-gig access point, look at the 2.5GbE adapter instead. For a gamer running a U6-Pro in the living room and a wired PC nearby, this is the simple, spec-matched choice.

• 30W PoE+ (802.3at)
• Surge and clamping protection
• Grounded AC cable
• 1-year warranty

Best for
U7 and multi-gig access points

The Ubiquiti Networks 2.5GbE 30W PoE+ Adapter, model UACC-PoE+-2.5G, pairs 30W of PoE+ with a 2.5 GbE data link. The listing names compatible devices including the U7-Pro, U7-Pro-Max, U7-Outdoor, U7-Pro-Wall, U7-Pro-Outdoor, U7-IW, U7-Lite, U6-Enterprise and U6-Enterprise-IW. Ubiquiti pitches it as a way to power UniFi PoE+ devices without leaning on a PoE switch’s power budget while still providing a multi-gigabit link.

Like the U-PoE-AT, it has surge and clamping protection. It accepts 100 to 240V AC input and uses an RJ45 shielded socket for Data In and PoE. The listed operating range is 32 to 104°F and 10 to 95% humidity, so keep it indoors. This is the injector for a Wi-Fi 7 setup where you want the access point’s link to keep up with fast wireless clients during downloads and game patches. It gives way to the U-PoE-AT only if your access point and switch are gigabit anyway.

• Up to 2.5 GbE data
• 30W PoE+
• Named U7 and U6-Enterprise compatibility

Best for
Legacy UniFi gear needing 48V gigabit

Best for
Gear specifically requiring 48V, 24W

The Ubiquiti Networks PoE Injector listed as POE-48-24W-WH is a white 48V DC, 24W injector according to its title. The spec fields list a 1000 Mbps data rate, RJ45 interface, 2 ports, plastic housing and a weight of 135.5 g.

Much of the rest of this listing is unreliable. Feature bullets such as “stays sharp even during intensive use” clearly belong to a different product, and the spec sheet lists 28 volts and a managed switch type, which contradicts the 48V title and the nature of an injector. The description is just the word “White.” Treat the title as the most trustworthy information, and buy this only if your device’s documentation specifically calls for a 48V, 24W injector. For U6 or U7 access points, choose one of the 30W PoE+ options above.

Best for
Low-power 24V gigabit devices

The UBIQUITI Networks POE-24-12W-5P Gigabit Ethernet PoE Adapter and Injector is a low-power unit. Its model name signals 24V and 12W, and the title lists 10/100/1000 Mbit/s gigabit Ethernet, 90 to 260V input at 47 to 63 Hz, 0.5A and an operating range of 0 to 40°C.

Protection features include an AC cord with grounding, surge protection and clamping protection. With only 12W on tap, it is not a PoE+ injector and is not the right match for a modern U6 or U7 access point, which the other listings pair with 30W units. It suits small devices whose documentation specifies a 24V, 12W injector, such as some compact point-to-point radios or older access points. If you are wiring up cameras around the house, our guide to PoE security cameras explains how their power needs compare.

The Ubiquiti Networks PoE 48V 0.5A GigEthernet adapter, POE-48-24W-G, is a 48V, 0.5A gigabit injector branded for UniFi in its feature line. It uses an RJ45 shielded socket and lists IEC 60950-1, UL60950-1, EN55022, EN55024 and FCC Class B certifications.

The spec sheet also includes battery fields, a battery capacity and “single use” reusability, none of which make sense for a wall-powered injector, so ignore those. Beyond voltage, current and gigabit support, the listing does not specify protection features or compatible devices. It suits owners of older UniFi hardware that calls for a 48V gigabit injector. For current U6 and U7 access points, the 30W PoE+ units are the listed matches.