Murray Lawn Mower Wheels: Genuine and Compatible Replacements
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Murray lawn mower wheels wear out, crack or strip their gear teeth long before the rest of the mower gives up, and the fix is usually a quick swap once you have the right part. The key is matching the part number and size: a walk-behind rear wheel, a lawn tractor wheel and a deck roller are very different parts, even when they all say “Murray” on the listing. Get the match right and you are back to a finished lawn, and back to your game, in one afternoon.
This article covers five wheels. Only one, the Murray 71132MA 8-Inch by 2-Inch Wheel, is described as a genuine Murray part. The other four are third-party replacements made to fit Murray equipment: an Oregon Parts pair cross-referenced to Murray 71133, the Rotary 11021 8 x 2 inch walk-behind wheel, and two 8TEN deck wheel packs for Murray tractors and zero-turn mowers. We compared listings, part numbers and specifications rather than fitting each wheel ourselves, so always check your own mower’s model number before ordering.
JOB SHEET
Which Murray Lawn Mower Wheel Should You Buy
- A pair of wheels to replace Murray part 71133: 2PK 72-113 Wheels Compatible with Murray
go to no. 01 - An 8 x 2 inch geared wheel for a 20, 21 or 22 inch self-propelled walk-behind: Rotary 11021 Mower Wheel
go to no. 02 - Deck wheels for Murray lawn tractors such as LT, CLT and ELT models: 8TEN Deck Wheel for Murray 092683MA
go to no. 03 - A genuine Murray 8 x 2 inch wheel with OEM fit: Murray 71132MA 8-Inch by 2-Inch Wheel
go to no. 04 - Deck wheels for Murray zero-turn and 1714760 applications: 8TEN Deck Wheel for Simplicity Murray
go to no. 05
No. 01
of 5
Oregon Parts
2PK 72-113 Wheels Compatible with Murray
9.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Owners replacing a Murray 71133 pair
Pros
- Two wheels per pack
- Cross-references OEM 71133
- Painted black metal per listing
Cons
- Third-party, not genuine Murray
- Size and bore not specified
The 2PK 72-113 Wheels Compatible with Murray pack comes from Oregon Parts, not Murray. The manufacturer part number is 72-113, and the listing gives Murray 71133 as the OEM equivalent. It includes two wheels, described as painted black metal, and lists the compatible vehicle type as a lawn tractor.
The listing is thin. It does not specify diameter, width, bore size or whether the wheels are geared. It also conflicts with the Rotary listing below, which describes Murray 071133 as an 8 x 2 inch plastic walk-behind wheel. Before ordering, measure your old wheel and compare it with photos, because a metal tractor wheel and a plastic geared walk-behind wheel are not interchangeable.
This pack suits owners who have already confirmed that 71133 is their part and want two wheels at once. Replacing wheels in pairs keeps both sides of the mower at the same height, which helps the deck cut evenly. It gives way to the Rotary 11021 if you need published dimensions, and to the genuine Murray wheel if you want OEM fit.
No. 02
of 5
Rotary
Rotary 11021 Mower Wheel
8.8
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Self-propelled walk-behinds with geared drive
Pros
- 8 x 2 inch with 1/2 inch bore
- Replaces 071133 and 071133MA
- Fits 20, 21 and 22 inch mowers
Cons
- Third-party, not genuine Murray
- Some listing specs look garbled
The Rotary 11021 Mower Wheel is a third-party plastic wheel that replaces Murray 071133 and 071133MA. It measures 8 inches in outside diameter and 2 inches wide with a 1/2 inch inner diameter, and it has a geared wheel drive for 20, 21 and 22 inch self-propelled walk-behind mowers. A geared wheel engages with the drive pinion on a self-propelled mower, so matching the gear is as important as matching the size.
It weighs 2.1 pounds and lists a load index of 40. Some specifications look garbled: the bore reads “1-2/0” and the wheel backspacing matches the diameter at 8 inches, while the feature list clearly states a 1/2 inch inner diameter. Trust the feature list and your own measurement.
Pick this for a self-propelled walk-behind that needs a geared rear wheel. It gives way to the deck wheel packs if you are fixing a tractor, and to the genuine Murray wheel if your parts diagram calls for 71132MA instead.
- 8 inch outside diameter, 2 inch width, 1/2 inch inner diameter
- Geared drive for 20, 21 and 22 inch self-propelled mowers
- Replaces Murray 071133 and 071133MA
No. 03
of 5
8TEN
8TEN Deck Wheel for Murray 092683MA
9.8
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Murray zero-turn and 38-inch deck owners
Pros
- Two deck wheels per pack
- Replaces 1714760 and 1714760SM
- Polypropylene construction
Cons
- Third-party, not genuine Murray
- Mostly fits other-brand models
Best for
Murray lawn tractor deck wheels
Pros
- Two deck wheels per pack
- Long list of compatible models
- Replaces 092683MA and 94129
Cons
- Third-party, not genuine Murray
- Deck roller only, not drive wheel
The 8TEN Deck Wheel for Murray 092683MA is a two-pack of third-party deck wheels from 8TEN Parts (810-CDW2254R). Deck wheels ride under the edge of a tractor’s cutting deck to keep it from scalping uneven ground, so they are small rollers rather than drive wheels. This one measures 4 7/8 inches in diameter and 2 11/16 inches wide, with a 1/2 inch inner diameter, and is molded from polypropylene.
It replaces OEM numbers 092683MA, 92683, 92683MA, 94129 and MU92683, plus a cross-reference to MU92265. The Murray model list is long, including 46370x5C through 46403x199A and tractors such as LT135420C, LT155420C, CLT185420, ELT175460H, RT195460 and MT24460. Each pack weighs 1.3 pounds.
This is the right choice for owners of those Murray tractors who need to replace worn deck rollers. It gives way to the other 8TEN pack for zero-turn models that use part 1714760.
No. 04
of 5
Murray
Murray 71132MA 8-Inch by 2-Inch Wheel
9.4
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Owners wanting a genuine Murray part
Pros
- Genuine Murray OEM part
- 8 x 2 inch size
- Replaces 7771132MA, 579914, 43618MA
Cons
- Bore size not specified
- Appears to be a single wheel
The Murray 71132MA 8-Inch by 2-Inch Wheel is the only genuine Murray part in this list. The listing describes it as an OEM replacement for proper fit and performance, and it replaces Murray parts 7771132MA, 7771132, 579914 and 43618MA. It measures 8 inches in diameter and 2 inches wide, with plastic and rubber materials.
The listing does not specify bore size or whether it is geared, and the “Size: 1” field suggests a single wheel rather than a pair. It is sold under a Briggs & Stratton brand field, which reflects the company that supplies Murray parts. If your mower calls for 71132MA or one of the older numbers it replaces, a genuine part removes the guesswork.
Pick it when you want OEM fit. It gives way to the Rotary 11021 if your mower needs a 071133 geared wheel. If you work on several mowers, see our guide to replacement push mower wheels for other part matches.
No. 05
of 5
8TEN
8TEN Deck Wheel for Simplicity Murray
8.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
The 8TEN Deck Wheel for Simplicity Murray is another third-party two-pack (810-CDW2235R), sized for part 1714760 and 1714760SM. It measures 3 7/8 inches in diameter and 2 1/4 inches wide with a 9/16 inch inner diameter, in polypropylene. A rim size field lists 2.25 inches, which conflicts with the diameter, so rely on the feature list.
Most compatible models listed are from other brands, but Murray models include ZT1644E, 1695967, 1696084 and 1694863, plus 38-inch deck part numbers. The pack weighs 12.8 ounces. Note that its 9/16 inch bore is larger than the 1/2 inch bore of the 092683MA pack, so the two deck wheels are not interchangeable even though they look similar.
Pick this for those Murray zero-turn and 38-inch deck applications. It gives way to the 092683MA pack for Murray LT and CLT tractors.
What Sets These Models Apart
| Wheel | Genuine or compatible | Listed size | Replaces |
|---|---|---|---|
| 2PK 72-113 | Compatible (Oregon Parts) | Not specified | 71133 |
| Rotary 11021 | Compatible (Rotary) | 8 x 2 in, 1/2 in bore | 071133, 071133MA |
| 8TEN 092683MA | Compatible (8TEN) | 4 7/8 x 2 11/16 in, 1/2 in bore | 092683MA, 94129 |
| Murray 71132MA | Genuine Murray | 8 x 2 in | 7771132MA, 579914, 43618MA |
| 8TEN 1714760SM | Compatible (8TEN) | 3 7/8 x 2 1/4 in, 9/16 in bore | 1714760, 1714760SM |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for Murray Lawn Mower Wheels
Start with the part number on your mower’s parts diagram, not the wheel’s appearance. Then measure outside diameter, width and bore. A wheel that is right in diameter but wrong in bore will not fit the axle, and one that is too wide can rub against the deck or housing.
Know which wheel you are replacing. Rear drive wheels on self-propelled mowers are geared, while deck wheels are free-spinning rollers. If maintenance is cutting into your gaming time, our look at robot lawn mowers shows another route.
Genuine parts cost the least guesswork; compatible parts can work well when the listing publishes clear dimensions and OEM numbers. For a quieter, lower-maintenance option, consider battery-powered mowers.
FAQ
Which of these wheels is genuine Murray?
Only the Murray 71132MA 8-Inch by 2-Inch Wheel. The others are third-party replacements from Oregon Parts, Rotary and 8TEN Parts.
What size is the Murray 71133 wheel?
The Rotary 11021 listing describes 071133 as 8 x 2 inches with a 1/2 inch bore. The Oregon Parts listing does not specify size, so measure your old wheel to confirm.
Is the Murray 71132MA wheel sold as a pair?
The listing shows “Size: 1” and does not mention a pair, so expect a single wheel.
What does a deck wheel do?
Deck wheels keep the cutting deck from gouging the lawn on bumps and slopes. They do not drive the mower.
Will the 8TEN deck wheels fit my Murray tractor?
Check the compatibility lists against your model number. The 092683MA pack lists many Murray LT, CLT and ELT tractors, while the 1714760SM pack covers Murray ZT1644E and several 38-inch deck models.
Does a Murray 8 x 2 wheel fit every Murray mower?
No. Even at the same 8 x 2 inch size, wheels differ in bore, gearing and hub design, so match the part number first.
