LONGER 3D Printers for Printing Minis, Props and Mods
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
If you want a LONGER 3D printer for gaming projects, the choice comes down to one trade-off: speed or size. The LK10 is the quick one, a CoreXY machine rated for up to 500mm/s with auto leveling and Wi-Fi, but its build area is the smallest of the three. The LK5 Pro 3 and the New LK10 Plus give you far more room for tall cosplay pieces and big terrain, with the LK10 Plus listing the largest volume of the family.
This LONGER 3D printer comparison covers three models: the LK5 Pro 3, the New LK10 Plus and the LK10. We compared the Amazon listings, specifications and the projects gamers actually print, from tabletop miniatures and dice towers to controller grips and full-size helmets. We did not run these printers ourselves, so where a listing is thin or contradicts itself, we say so rather than fill the gap with guesses.
JOB SHEET
Which LONGER 3D Printer Should You Buy
- Fast batches of tabletop minis, dice trays and controller mods: LONGER LK10 3D Printer
go to no. 03 - Full-size helmets, armor plates and other large cosplay props: LONGER New LK10 Plus 3D Printer
go to no. 02 - Tall single-piece prints plus open-source firmware to tinker with: LONGER LK5 Pro 3 3D Printer
go to no. 01 - Printing in TPU for flexible grips or bumpers: LK10 or LK10 Plus, both list TPU support
- Watching long prints from another room: LONGER LK10 3D Printer, with its camera interface and Wi-Fi
go to no. 03
No. 01
of 3
Longer
LONGER LK5 Pro 3 3D Printer
9.6
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Tinkerers who want a tall, open-source build
Pros
- 300x300x400mm build size
- Open-source firmware and G-code
- Resume printing after power loss
- 3-inch color touch screen
Cons
- No auto leveling; BLTouch sold separately
- Listing mixes 90% and 95% pre-assembled
The LONGER LK5 Pro 3 3D Printer is the classic large-format option in the lineup. Its listing gives a build size of 300 x 300 x 400mm, which is a lot of vertical room: a full sword hilt, a tall display stand or a stacked dice tower can print in one go instead of being split and glued. Diagonal support rods form a triangular frame that the listing says reduces vibration, which matters on tall prints where wobble shows up as visible lines near the top.
This is the printer for players who like to tinker. The firmware is open source, you can change G-code, and the listing notes that a BLTouch sensor can be installed for automatic leveling, though the sensor is not included. That means out of the box you level the bed yourself. A 4.3-inch full-color touch screen, a lattice glass plate, a filament detection sensor and resume-after-power-loss round out the package, and a dual blower kit cools filament quickly to limit warping and stringing.
Be aware that the listing is inconsistent in places. The title says 95% pre-assembled and TMC 2209 drivers, while the feature text says 90% pre-assembled and TMC2208 drivers. The product dimensions are also listed as 10 x 10 x 10 inches, which cannot contain a 300 x 300 x 400mm build area, so treat that figure as an error and plan desk space accordingly. If you want speed and hands-off setup, the LK10 is the better fit; the LK5 Pro 3 wins on height and hackability.
- 300 x 300 x 400mm build size
- Open-source motherboard and firmware, BLTouch mount provided (sensor not included)
- Resume printing after power loss and filament detection
- Dual blower cooling kit and lattice glass plate
No. 02
of 3
Longer
LONGER New LK10 Plus 3D Printer
9.2
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Cosplayers printing big helmet and armor parts
Pros
- Largest listed volume: 320x320x400mm
- Wide listed filament support incl. TPU and nylon
Cons
- Listing gives almost no feature details
- Large, heavy footprint
The LONGER New LK10 Plus 3D Printer,320×320×400mm is the size champion here. Its headline figure is a 320 x 320 x 400mm build volume, a little wider and deeper than the LK5 Pro 3 with the same height. For cosplay makers, that extra width is what lets a helmet shell or a shoulder pauldron fit in fewer pieces, which means fewer seams to sand and fill before painting.
The catch is that this listing is very sparse. Beyond the build volume, it gives product dimensions of 21.7 x 22.6 x 24.6 inches, a weight of 30.4 pounds, and a long list of compatible filaments: ABS, ASA, nylon, PETG, PLA and TPU. The listing does not specify print speed, motion system, leveling method, extruder type, screen or connectivity. The name suggests a relative of the LK10, but we will not assume it shares the LK10’s CoreXY design, Klipper support or auto leveling, because this listing never says so. Check the product page or ask the seller before you buy if any of those features matter to you.
Choose the LK10 Plus if build volume is the top priority and you are comfortable confirming details yourself. If you need proof of fast printing and smart features today, the LK10’s listing documents them clearly.
- 320 x 320 x 400mm build volume, the largest of the three
- Listed filament support includes ABS, ASA, nylon, PETG, PLA and TPU
- Works with laptop, PC, smartphone and tablet according to the listing
No. 03
of 3
Longer
LONGER LK10 3D Printer
8.8
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Mini painters who value speed and convenience
Pros
- Up to 500mm/s CoreXY with Klipper
- Auto bed leveling
- 300°C direct drive extruder
- Dual-band Wi-Fi and camera interface
Cons
- Smallest build volume: 225x225x265mm
- No big single-piece props
The LONGER LK10 3D Printer is the performance pick. It is a CoreXY printer, a layout where two motors work together to move the print head in X and Y, keeping moving mass low so the head can change direction quickly. The listing rates it for speeds up to 500mm/s with a high-performance mainboard and Klipper firmware support, a combination known for fast, responsive printing. Dual Z-axis motors with synchronized lead screws keep the bed moving evenly.
It also removes the fiddly parts of the hobby. Automatic bed leveling means no manual calibration before each session, a high-flow direct drive extruder reaches 300°C for tougher materials, and 5015 twin ball-bearing fans handle cooling, which helps with overhangs on miniatures like outstretched arms and weapons. You get 8GB of built-in storage, dual-band 2.4G and 5.8G Wi-Fi for wireless file transfer, and a dedicated camera interface for watching prints over your local network. Filament runout detection and power failure recovery are included too.
The trade-off is space. At 225 x 225 x 265mm, the LK10 has the smallest build volume in this group. That is plenty for a plate of minis, a controller stand or a headset hook, but a full helmet will need to be split into parts. If you print big props more often than small ones, move up to the LK10 Plus or the LK5 Pro 3.
- Up to 500mm/s CoreXY motion with Klipper firmware support
- Automatic bed leveling and dual Z-axis motors
- 300°C high-flow direct drive extruder
- Dual-band Wi-Fi, 8GB storage and camera monitoring interface
What Sets These Models Apart
| Model | Build volume | Speed and motion | Leveling |
|---|---|---|---|
| LK5 Pro 3 | 300 x 300 x 400mm | Listing does not specify speed | Manual; BLTouch optional, not included |
| New LK10 Plus | 320 x 320 x 400mm | Listing does not specify | Listing does not specify |
| LK10 | 225 x 225 x 265mm | Up to 500mm/s, CoreXY | Automatic |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for LONGER 3D Printers
Start with what you print most. A large build volume 3D printer sounds like the safe choice, but if most of your queue is 28mm or 32mm miniatures, terrain tiles and small mod parts, a faster machine will save you far more time than extra space. Large props are where volume pays off: every split in a helmet adds sanding, gluing and filler work. If you are still weighing other families before you commit, our look at another popular printer lineup is a useful comparison point.
Think about how much setup you enjoy. The LK5 Pro 3 rewards people who like to tune firmware and level beds by hand, while the LK10 is closer to load-and-print thanks to auto leveling and Wi-Fi. For a younger gamer in the house who is just starting out, a simpler machine may be kinder, and our guide to 3D printers for kids covers that angle.
Finally, match materials to projects. PLA is easy for display pieces, PETG handles functional parts like controller stands, and TPU suits flexible grips and bumpers. The LK10 and LK10 Plus both list TPU, ABS and ASA support. If you also want to personalize finished props with engraved logos, the LONGER laser engraver lineup pairs well with a printer from the same brand.
FAQ
Which LONGER 3D printer is fastest?
The LK10 is the only model here whose listing states a speed, rated up to 500mm/s on a CoreXY frame with Klipper firmware support. The LK5 Pro 3 and LK10 Plus listings do not specify a print speed.
Which LONGER printer is best for large cosplay props?
The New LK10 Plus lists the largest build volume at 320 x 320 x 400mm, followed closely by the LK5 Pro 3 at 300 x 300 x 400mm. Either can handle much bigger single pieces than the LK10.
Does the LONGER LK5 Pro 3 have auto leveling?
Not out of the box. The listing says a BLTouch sensor can be installed, but it is not included in the package, so you level the bed manually unless you add one.
Is the LK10 good for printing miniatures?
Its listing points in that direction: a direct drive extruder, 5015 twin cooling fans and auto leveling all support clean small prints, and its 225 x 225 x 265mm bed fits a full plate of minis at once.
Can I monitor prints remotely on a LONGER printer?
The LK10 supports camera monitoring through a dedicated interface over your local network and offers dual-band Wi-Fi. The LK5 Pro 3 listing mentions no wireless features, and the LK10 Plus listing does not specify.
Is the LK10 Plus just a bigger LK10?
The name suggests it, but the listing only confirms the build volume, size, weight and filament list. It does not specify speed, motion system or leveling, so confirm those details before assuming it matches the LK10.
While a reliable 3D setup handles physical props and terrain, tabletop campaigns also rely heavily on detailed character sheets, custom tokens, and battle maps. Hobbyists looking to balance physical fabrication with crisp paper assets can consult our Laser Printer Guide for dependable high-volume document options. Combining both technologies ensures your tabletop sessions stay fully equipped from miniature figures to printed campaign materials.
