Hyper Tough 12V: Bare Drills and a Charger for Your Batteries
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
If you already own Hyper Tough 12V batteries, the two bare drill drivers here let you add or replace a drill without paying for another battery and charger, and the third product is a replacement charger for certain older Hyper Tough 12V models. The key thing to know before you click: both drills ship as bare tools with no battery and no charger, and the charger is a third-party part sold by PowerHOOD, not a Hyper Tough accessory.
This article covers three products. The first is the 99303 3/8-inch drill driver, the second is the 6084 brushless drill driver, and the third is a 13.5V barrel-plug charger that lists compatibility with Hyper Tough models 98804, 99318, 99315, 99323, 99336 and 98826. The listings for the drills are extremely short, and both name “Generic” as the brand even though the titles say Hyper Tough, so we flag what is and is not confirmed as we go.
JOB SHEET
Which Hyper Tough 12V Tool Should You Buy
Best for: Owners replacing a worn 99303 drill
Pros
- Model 99303 named in listing
- 3/8-inch chuck
- Metal build per listing
Cons
- No battery or charger included
- Sold under Generic brand label
- Replacing a worn or lost 99303 drill with the same model: Hyper Tough 12V Cordless 3/8-inch Drill Driver 99303
go to no. 01 - Adding a brushless drill body to your 12V battery collection: Hyper Tough 12V Brushless Drill Driver 6084
go to no. 02 - Replacing a lost charger for a listed older 12V model: Charger for Hyper Tough 98804 99318
go to no. 03
No. 01
of 3
Hyper Tough 12V Cordless 3/8-inch Drill Driver 99303
9.2
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
The Hyper Tough 12V Cordless 3 8-inch drill driver, model 99303, is sold as a bare tool. The listing says in capital letters that there is no battery and no charger, and the included components line confirms “Bare Tool.” The brand field reads Generic while the manufacturer field reads Hyper Tough, which usually indicates a reseller listing of a genuine tool rather than a new product line, but the listing does not state whether the unit is new, refurbished or pulled from a kit.
What the specs do confirm: 12 volts, a 3/8-inch (0.38 inch) maximum chuck, a metal material type, a listed weight of 2 pounds and item dimensions of 8 x 6 x 12 inches, which probably describe the packaging. The drill type is given as combination drill. The listing does not specify torque, speed settings, clutch positions, whether it has an LED light, or whether the chuck is keyless. It also does not say which Hyper Tough 12V batteries fit, so check your battery against the 99303 before ordering.
- Model 99303, 12V
- 3/8-inch maximum chuck size
- Bare tool, no battery or charger
This suits someone who already runs a 99303 and wants a second body or a direct replacement. If you are starting from scratch with no batteries, a bare tool is the wrong buy. For a full kit comparison, our cordless drill guide covers what a complete package should include.
No. 02
of 3
Hyper Tough 12V Brushless Drill Driver 6084
8.4
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
The Bare Tool Hyper Tough 12V Brushless drill driver, model 6084, is the other bare option. Its title states it is brushless and, again, that there is no battery and no charger. The brand is listed as Generic, the power source as battery powered, the voltage as 12, and the dimensions as 8 x 6 x 12 inches.
That is essentially the whole listing. It does not specify chuck size, torque, speed, weight, battery compatibility or condition. What we can say from general knowledge is what brushless means: a brushless motor uses electronic commutation instead of carbon brushes, which generally means less friction, less heat and better efficiency per charge than a brushed motor of similar size. For a small 12V drill, that can translate into more work from each battery and less maintenance over the tool’s life, though actual gains depend on the specific motor and electronics, which this listing does not detail.
This fits a 12V owner who wants a brushless body to pair with batteries they already have, and who is comfortable confirming compatibility with the seller. If you specifically need the 3/8-inch chuck confirmed in writing, the 99303 listing is clearer on that point.
No. 03
of 3
PowerHOOD
Charger for Hyper Tough 98804 99318
8.6
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Replacing a lost barrel-plug 12V charger
Pros
- Lists specific Hyper Tough model numbers
- Overvoltage and short circuit protection
- 100-240V input
Cons
- Third-party PowerHOOD part, not Hyper Tough
- Slow 0.4A output
The Charger for Hyper Tough 98804 99318 is a replacement charger from a third party. The listing names PowerHOOD as brand and manufacturer, and the storefront brand line reads “POWER YOU AS A NEIGHBOR.” It is not made by Hyper Tough, and we would not treat it as an official part.
Compatibility is listed by model number: Hyper Tough 98804, 99318, 99315, 99323, 99336 and 98826, along with the original charger model JLH111350400U2. It mentions 12V Max 1.5Ah packs and cordless ratchet and impact drill models. Note that neither drill above, the 99303 or the 6084, appears on this compatibility list, so do not assume this charger works with the batteries for those drills. Match your old charger’s model number or your tool’s model number to the list first.
Electrically, it takes 100 to 240V input at 50 to 60Hz and outputs 13.5V DC. The listing gives the amperage as 0.4A in one spot and 0.5A in another, which is a minor inconsistency; the highlight line reads 13.5V 400mA. It connects through a barrel connector with a single port and weighs 1.1 pounds. The listing claims overvoltage, short circuit and overcurrent protection. A 0.4A output is slow by modern standards, so expect a long charge time on a 1.5Ah pack, even though the listing describes it as fast and efficient.
- Output 13.5V DC, 0.4A per the highlight line
- Barrel connector, single port
- Overvoltage, short circuit and overcurrent protection
One more practical point on this charger: because it plugs into the tool or pack through a barrel connector rather than a slide-on cradle, it is designed for the type of 12V tool that charges through a port on the body or pack. If your existing charger is a cradle you drop a battery into, this is not a like-for-like swap, so compare the plug on your old unit before you order.
What Sets These Models Apart
| Product | Type | Listed brand | Key confirmed detail |
|---|---|---|---|
| Drill Driver 99303 | Bare drill | Generic (manufacturer Hyper Tough) | 3/8-inch chuck, 2 lb |
| Brushless Drill Driver 6084 | Bare drill | Generic | Brushless, few other specs |
| Charger for 98804 99318 | Charger | PowerHOOD | 13.5V output, barrel connector |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for Hyper Tough 12V Tools
Start with what you own. A bare tool only makes sense if you already have a compatible 12V battery and charger. Find the model number on your battery and on your existing tool, then confirm with the seller that the drill body accepts that battery. The drill listings here do not spell out compatibility, so asking is the safest step.
For the charger, model numbers matter more than voltage. Many 12V tools use different connectors and pack designs, and this one uses a barrel plug. Check that your old charger or tool is on the listed models, and remember it is a third-party part. If you want a budget drill that ships with everything in the box instead, our look at a budget power drill kit is a better starting point.
Finally, be realistic about what a 12V drill does well: small fasteners, furniture assembly, mounting a monitor arm or a TV bracket into studs with pilot holes. For heavy masonry or large-diameter holes, a higher-voltage tool is the better tool for the job.
FAQ
Do the Hyper Tough 12V bare drills come with a battery?
No. Both the 99303 and the 6084 listings state no battery and no charger. You need your own compatible 12V battery and charger.
Is the Hyper Tough 12V charger made by Hyper Tough?
No. The listing names PowerHOOD as the brand and manufacturer. It is a third-party charger that lists compatibility with specific Hyper Tough models.
Will the charger work with the 99303 or 6084 drill batteries?
The listing does not include either model. It lists 98804, 99318, 99315, 99323, 99336 and 98826, so check your own model before relying on it.
What is the difference between the 99303 and the 6084 drill?
The 6084 is listed as brushless. The 99303 listing confirms a 3/8-inch chuck and a 2 pound weight but does not say brushless. Beyond that, neither listing gives torque or speed figures.
Which Hyper Tough 12V drill should I buy?
If you want an exact replacement for a 99303, buy the 99303. If you want a brushless motor and can confirm battery fit, the 6084 is the upgrade pick.
