eSUN Orange PETG Filament vs SUNLU Orange Alternatives
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
If you are looking for eSUN orange PETG, the spool you want is eSUN Basic PETG in Transparent Orange: a 1 kg, 1.75mm glossy PETG with high toughness and a see-through orange tint. It is a strong choice for controller stands, headset hooks and cosplay details that should glow a little when light hits them. Before you buy, though, it helps to know what else sits nearby, because not every orange PETG looks or prints the same.
This orange PETG filament comparison covers three spools. Only one is made by eSUN. The other two come from SUNLU: a standard PETG in Sunny Orange and a high speed PETG in orange with a matte finish. All three are 1.75mm, 1 kg spools, but they differ in transparency, surface finish and how fast they are meant to print. We compared listings and published settings, not our own test prints, so anything a listing leaves out we flag rather than guess.
JOB SHEET
Which Orange PETG Should You Buy
- A translucent, glossy orange from eSUN itself: eSUN Basic PETG Filament 1.75mm, Transparent Orange
go to no. 01 - A bright glossy orange with tight diameter tolerance: SUNLU PETG Filament 1.75mm, 1kg, Sunny Orange
go to no. 02 - Fast printing on a modern high speed machine, with a matte look: SUNLU High Speed PETG, Orange
go to no. 03
No. 01
of 3
eSUN
eSUN Basic PETG Filament 1.75mm, Transparent Orange
9.2
/10
Our score
Well rated
Scored 9.2/10 or higher
MATERIALS
- High Toughness
- Excellent Printing Performance, Wide Range of Applications
- #1
- 273 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #81 in 3D Printing Filament
Copied from the Amazon listing for this model.
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Translucent orange props and light diffusers
Pros
- Transparent orange color
- Glossy, high-toughness PETG
- Listed low shrinkage and warping
Cons
- No print temperatures listed
- Diameter tolerance not stated
The eSUN Basic PETG Filament 1.75mm in Transparent Orange is the only eSUN spool here and the one this search is really about. eSUN positions its Basic PETG as an economical material that combines the ease of PLA with the toughness of ABS, and it highlights high toughness that withstands impacts and deformation. For a controller stand that gets knocked off a desk or a prop blaster that gets carried around a convention hall, toughness matters more than stiffness.
The standout trait is the color. Transparent orange PETG lets light through, and eSUN specifically calls out high brightness and dimensional stability for transparent or translucent products such as lighting equipment. That makes it a natural fit for LED-lit cosplay pieces, glowing emblems, light bar diffusers for a setup, or display cases for figures. eSUN also claims a glossy surface and good dimensional stability without shrinkage and warping.
What the listing does not specify is just as important. It does not give recommended nozzle or bed temperatures, print speeds or a diameter tolerance, so start with your slicer’s general PETG profile and tune from there. If you need an opaque-looking bright orange or a published tolerance, the SUNLU Sunny Orange spool is the closer match. If you print at very high speeds, the SUNLU High Speed PETG is designed for that.
- Transparent orange, 1 kg, 1.75mm
- High toughness and impact resistance
- Glossy finish with good dimensional stability
- Suited to translucent and light-diffusing prints
No. 02
of 3
Sunlu
SUNLU PETG Filament 1.75mm, 1kg, Sunny Orange
8.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Bright opaque-looking orange functional parts
Pros
- ±0.02mm diameter accuracy
- Dried and vacuum-sealed
- Neat automated winding
Cons
- Not an eSUN product
- No print settings listed
The SUNLU PETG Filament 1.75mm,1kg,Sunny Orange is not an eSUN product. It is a SUNLU spool included because it is a common alternative for anyone who wants a bright orange PETG. SUNLU describes high strength and impact resistance for functional parts and brackets, easy printing with low shrinkage and minimal warping, and strong layer adhesion.
Where SUNLU gives more detail than eSUN is in quality control. The listing states ±0.02mm diameter accuracy, fully automated winding with manual checks for tangle-free spools, and that each spool is dried and vacuum-sealed to avoid clogs and bubbles. PETG absorbs moisture from the air, and wet PETG strings and pops, so a dry, sealed spool is a real advantage out of the box. The highlight also claims less stringing.
SUNLU describes PETG in general as having clarity and a gloss finish with excellent light transmission, but the color name, Sunny Orange, does not say whether this particular spool is transparent. We would not assume it matches eSUN’s see-through look. Choose it for durable functional parts like cable clips, headset hangers and wall mounts in a vivid orange. For a guaranteed translucent effect, eSUN’s Transparent Orange is the safer choice. The listing does not give print temperatures.
- ±0.02mm diameter accuracy
- Dried and vacuum-sealed spool
- Automated, tangle-free winding
- Glossy finish, less stringing per highlight
No. 03
of 3
Sunlu
SUNLU High Speed PETG, Orange
8.2
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Fast printers and matte cosplay parts
Pros
- Rated 30-600mm/s
- Speed-matched temperature guide
- Matte, less plastic-like finish
- 1-year warranty
Cons
- Not an eSUN product
- Matte, not see-through
The SUNLU High Speed PETG 3D Printer Filament in orange is also from SUNLU, not eSUN. It is built for modern fast printers: SUNLU rates it for 30mm/s to 600mm/s and claims 500% more fluidity and 180% improved heat dissipation. The highlight says it fits most FDM printers, and names Bambu Lab printers specifically.
This is the only spool in the group with a detailed settings guide. SUNLU recommends a 70-80°C bed and ties nozzle temperature to speed: 230-240°C for 50-100mm/s, 240-255°C for 100-300mm/s, and 255-270°C for 300-600mm/s. Matching temperature to speed is the key to high speed PETG, because faster printing leaves less time for the plastic to melt.
The other big difference is finish. SUNLU describes a soft, even matte effect that reduces the glossy sheen of typical plastics. That makes it great for cosplay armor and prop surfaces that should not look like shiny plastic, but it is the opposite of eSUN’s glossy transparent look. It has a one-year manufacturer warranty. Choose it if speed and a matte finish matter more than translucency.
- 30-600mm/s rated print speed
- Speed-matched temperature guide
- Matte finish
- One-year warranty
What Sets These Models Apart
| Spool | Brand | Finish and color | Published print guidance | Diameter tolerance |
|---|---|---|---|---|
| Basic PETG Transparent Orange | eSUN | Glossy, transparent orange | Not specified | Not specified |
| PETG Sunny Orange | SUNLU | Glossy, transparency not stated | Not specified | ±0.02mm |
| High Speed PETG Orange | SUNLU | Matte orange | 70-80°C bed, 230-270°C nozzle by speed | Not specified |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for Orange PETG Filament
Decide on the look first. Transparent orange diffuses light and suits lit props, glowing badges and display pieces. A glossy opaque-looking orange suits clean functional parts. A matte finish hides layer lines better and looks less like plastic, which helps cosplay armor and props. Within these three spools, each covers one of those looks.
Next, match the filament to your printer. If you run a fast, modern printer and push speeds past 300mm/s, standard PETG may under-extrude, while high speed PETG is formulated to flow faster. On slower printers, standard PETG is usually easier to dial in. Keep PETG dry either way: store open spools sealed with desiccant, and dry a spool if you see stringing or popping.
Plan for finishing. PETG is tougher and slightly more flexible than PLA, so it holds up in props and stands but can be harder to sand. A good set of sharp orange-handled workshop tools helps with trimming supports, deburring holes and cleaning edges before paint or clear coat. Take your time around thin details, since PETG tends to stretch rather than snap cleanly.
Finally, think about your print space. Long overnight prints for a full cosplay build can leave a small room stuffy, so ventilation comes first, and a light air freshener for the print room is a small comfort upgrade on top. If you print in a bedroom or next to your gaming desk, an enclosure or a well-placed fan also keeps drafts from affecting layer adhesion on larger PETG parts.
FAQ
Is eSUN orange PETG transparent?
The eSUN Basic PETG spool in this guide is listed as Transparent Orange, and eSUN highlights its suitability for translucent products.
Are the SUNLU spools made by eSUN?
No. Both SUNLU spools are from a different brand and are included only as orange PETG alternatives.
What temperature should I print eSUN Basic PETG at?
The listing does not specify print temperatures. Start with a standard PETG profile in your slicer and adjust based on results.
Which orange PETG is best for high speed printers?
The SUNLU High Speed PETG, rated for 30 to 600mm/s with a temperature guide for each speed range.
Which spool is best for cosplay props?
For glowing or lit details, eSUN’s Transparent Orange. For armor surfaces that should look less like plastic, SUNLU High Speed PETG’s matte finish.
Why does my orange PETG string so much?
Stringing usually comes from moisture in the filament or a nozzle temperature that is too high. Drying the spool and lowering temperature slightly in small steps often helps, and SUNLU’s vacuum-sealed packaging is meant to deliver dry filament from the start.
Do these spools fit my printer?
All three are 1.75mm filament on 1 kg spools, which suits most consumer FDM printers that take 1.75mm filament.
