DeWalt Miter Saw Clamps: Genuine and Compatible Hold-Downs
Every spec and price on this page is quoted from the Amazon listing for that model. Scores are out of 10, based on listed specifications and buyer feedback. Nothing here was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
The right DeWalt miter saw clamp comes down to one part number and your saw’s model and type. For the DW717, DW718 and DWS780, the common hold-down clamp is DeWalt part 630065-00, and a genuine two-pack is available. For the older DW708 and DW718 material clamp that replaces the DW7082, the genuine part is 153650-00. Several other brands sell clamps built to those part numbers, and they can fit well, but they are not DeWalt parts and their listings vary in quality. A good clamp keeps a board from creeping during the cut, which is exactly what you want when building desk tops, monitor shelves and cable trays that need square, repeatable edges.
This article covers six products: two genuine DeWalt clamps (630065-00 and 153650-00), three third-party clamps sold as compatible with DeWalt saws, and a third-party pair of DeWalt miter saw stand brackets for DW723 and DWX72x stands. We label each one as genuine or third-party. We compared listings and compatibility claims rather than fitting each clamp, and we flag where listing data looks off.
JOB SHEET
Which DeWalt Clamp Should You Buy
- Genuine clamp for DW717, DW718 or DWS780: Dewalt DW718 / DWS780 / DW717 Miter Saw Clamp Assembly, 630065-00.
- Third-party clamp listed for DW703 through DW716 and DWS780 Type 4: 2-Pack 630065-00 Hold Down Clamps Compatible with DeWalt.
- Genuine material clamp that replaces the DW7082 on DW708 or DW718: Dewalt 2 Pack DW708/DW718 Miter Saw Material Clamp, 153650-00.
- Mounting brackets for DW723 or DWX723, DWX724 and DWX725 stands, third-party: DW7231 Miter Saw Mounting Brackets.
- Third-party clamp with a type-by-type fit list and install guide: 630065-00 Miter Saw Clamp Assembly for DW717, DW718, DWS779, DWS780.
- Single spare clamp for many DeWalt saws, third-party: #630095-00 Miter Saw Clamp Assy.
No. 01
of 6
Dewalt
Dewalt DW718 / DWS780 / DW717 Miter Saw Clamp Assembly (Genuine)
9.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
The Dewalt DW718 DWS780 DW717 Miter Saw Clamp Assembly two-pack is the genuine DeWalt 630065-00 clamp, sold by DeWalt. The description lists compatibility with the DW718 Type 2 and Type 3, the DW717 10 inch miter saw and the DWS780 Type 1 12 inch compound miter saw. The pack includes two clamps made of metal, with a listed weight of 8 ounces.
That is nearly all the listing offers, so check your saw’s type number on its nameplate. If you own a DWS780 with a later type, this listing only confirms Type 1. For owners of a DeWalt 12 inch miter saw like the DWS780, a genuine clamp is the safest bet for a correct fit.
- Genuine DeWalt part 630065-00
- Two clamp assemblies
- Listed for DW717, DW718 Type 2 and 3, DWS780 Type 1
No. 02
of 6
Rmspo
2-Pack 630065-00 Hold Down Clamps Compatible with DeWalt (Third-Party)
9.0
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Older DW70x and DW71x saws
Pros
- Lists DW703 to DW716 fit
- Quick clamp and release
- One-year seller warranty
Cons
- Third-party, not DeWalt
- Pack quantity listed inconsistently
The 2-Pack 630065-00 Hold Down Clamps Compatible with DeWalt Miter Saws are made by RMSPO, not DeWalt. The listing names compatibility with the DW703, DW705, DW706, DW708, DW713, DW715 and DW716, plus the DWS780 Type 4, which is useful if your DWS780 is a later type than the genuine listing confirms. A quick clamp and release mechanism holds the board without fiddly adjustment.
The listing explains installation: the shaft goes into a hole on the back of the saw with the clamp facing back, and a flat spot on the shaft means it fits only one way. The seller offers a one-year warranty. The title says 2-pack, but the specs list an item package quantity of 1, so confirm what arrives. It suits owners of older DW70x and DW71x saws.
No. 03
of 6
Dewalt
Dewalt 2 Pack DW708/DW718 Miter Saw Material Clamp (Genuine)
8.2
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
DW708 or DW718 material clamp replacement
Pros
- Genuine DeWalt 153650-00
- Replaces DW7082 clamp
- Two clamps included
Cons
- Spec sheet has saw-blade errors
- Few details on fit
The Dewalt 2 Pack DW708 DW718 Miter Saw Material Clamp is the genuine DeWalt 153650-00, listed as replacing the DW7082 clamp. It fits the DW708 and DW718 per the title, and two material clamps are included.
Much of the spec sheet is copied from a saw blade listing, with entries like 60 teeth and high speed steel blade material, so ignore those. The listing does not give weight or type numbers. It suits owners of a DW708 or DW718 who want the genuine DW7082-style material clamp.
No. 04
of 6
Braveboy
DW7231 Miter Saw Mounting Brackets (Third-Party)
8.6
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Mounting a saw on DW723 or DWX725 stands
Pros
- Fits DW723, DWX723, DWX724, DWX725
- Two brackets plus hardware
- Polymer feet won’t scratch
Cons
- Third-party, not DeWalt
- Not a hold-down clamp
The DW7231 Miter Saw Mounting Brackets Compatible with DeWalt stands are made by Braveboy, not DeWalt. These are not hold-down clamps; they are the DeWalt miter saw stand brackets that secure a saw to the DW723, DWX723, DWX724, DWX725 and DWX725B stands, sold under part numbers DW7231, DE7025-XJ and N087371.
The package includes two tool mounting brackets and mounting hardware. Easy-to-attach clamps allow quick tool installation and removal, and rugged polymer feet let you set the saw down on a flat surface without scratching it. The seller asks buyers to compare dimensions with their original parts. It suits anyone who has lost or damaged the brackets on a DeWalt miter saw stand.
No. 05
of 6
Laofudech
630065-00 Miter Saw Clamp Assembly for DW717, DW718, DWS779, DWS780 (Third-Party)
8.4
/10
Our score
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
DW717, DW718 or DWS779 with clear install notes
Pros
- Detailed type-by-type fit list
- Clear installation steps
- Two clamps per pack
Cons
- Third-party, not DeWalt
- DWS780 type not specified
The 630065-00 Miter Saw Accessories for Miter Saw Clamp Assembly two-pack is made by Laofudech, not DeWalt. Its compatibility list is the most detailed here, naming DW717 Type 1 and 2, DW717-AR and DW717-B2 variants, DW718 Type 2 and 3, DW718-AR Type 2, and the DWS779, with DWS780 in the title.
The installation guidance is clear: insert the shaft, flat spot down, into the back of the saw with the clamp facing backward, then rotate it forward and the narrower section of the shaft locks it in place. Two metal clamps are included. It suits owners of a DeWalt dual bevel sliding miter saw like the DWS779 who want a detailed fit list.
- Type-by-type compatibility list
- Step-by-step install notes
- Two metal clamp assemblies
No. 06
of 6
Tolxh
#630095-00 Miter Saw Clamp Assy (Third-Party)
9.2
/10
Our score
Well rated
Scored 9.2/10 or higher
Affiliate link. Price and stock live at Amazon and change there, not on this page.
Best for
Single spare clamp for many DeWalt saws
Pros
- Broad model list
- Metal construction
- Seller refund policy
Cons
- Non-OEM, part number confusion
- Only one clamp
The #630095-00 Miter Saw Clamp Assy DW703 is made by Tolxh and is explicitly not an OEM part, though the seller says it meets OEM manufacturing requirements. The title lists the DW703, DW705, DW706, DW708, DW713, DW715, DW716, DWS780, DW717 and DW718.
Be careful with part numbers. The listing uses #630095-00 as its model number but also references 630065-00, and the description says the manufacturer name and part numbers are for reference only. It is a single clamp, not a pair, weighing 1.4 pounds. The seller offers a one month refund if installation fails. It suits someone who needs one spare clamp and has confirmed the fit.
What Sets These Models Apart
| Product | Genuine or third-party | Part number | Quantity |
|---|---|---|---|
| DW718/DWS780/DW717 Clamp | Genuine DeWalt | 630065-00 | 2 |
| 2-Pack Hold Down Clamps | Third-party (RMSPO) | 630065-00 | 2 per title |
| DW708/DW718 Material Clamp | Genuine DeWalt | 153650-00 | 2 |
| DW7231 Mounting Brackets | Third-party (Braveboy) | DW7231 | 2 brackets |
| 630065-00 Clamp Assembly | Third-party (Laofudech) | 630065-00 | 2 |
| #630095-00 Clamp Assy | Third-party (Tolxh) | 630095-00 / 630065-00 | 1 |
Figures in this table are copied from the Amazon listings for these models.
NOTES
Buying Tips for DeWalt Miter Saw Clamps
Read your saw’s nameplate. DeWalt uses type numbers to mark revisions within the same model, and clamp fit can change between types. Match both the model and the type against the listing before ordering.
Decide between genuine and third-party. Genuine DeWalt parts give you known fit, while third-party clamps can be useful when a listing names your exact type, as the RMSPO clamp does for the DWS780 Type 4. Look for listings with clear install notes and warranty terms.
Use the clamp every time you make small or narrow cuts. Holding short pieces by hand near the blade is where most miter saw injuries happen, and a clamp also keeps the workpiece from shifting so repeated cuts for shelves and desk parts come out identical.
FAQ
What is the DeWalt 630065-00 clamp?
It is the hold-down clamp assembly listed for saws like the DW717, DW718 and DWS780. The genuine two-pack is listed for DW718 Type 2 and 3, DW717 and DWS780 Type 1.
What does the 153650-00 clamp replace?
The genuine DeWalt 153650-00 material clamp is listed as replacing the DW7082 on the DW708 and DW718.
Which clamp fits a DWS780 Type 4?
The RMSPO 2-pack lists the DWS780 Type 4. The genuine listing only confirms Type 1.
Are the DW7231 brackets clamps?
No. They are mounting brackets that attach a miter saw to DW723 and DWX72x stands.
Is the #630095-00 clamp a DeWalt part?
No. The listing states it is not an OEM part and that part numbers are for reference only.
How do I install a 630065-00 style clamp?
Insert the shaft into the hole on the back of the saw with the clamp facing back, flat spot aligned, then rotate the clamp forward to lock it.
