Aqara HomeKit Devices: Build a Smart Home Around Apple Home

Best for
Front door video with a built-in hub

The Aqara Smart Doorbell Camera G410 is the most feature-packed device here. It supports Apple HomeKit Secure Video for encrypted recording and iCloud storage, and the listing also names Matter, Alexa, Google Assistant, SmartThings and Home Assistant. Its standout trick is a built-in Aqara Zigbee and Matter hub, so sensors, lights and locks can connect through the doorbell without a separate hub.

Motion detection uses mmWave radar, which the listing says detects human presence more accurately than PIR sensors and cuts false alerts from pets, wind or shadows. Video is 2K with a wide-angle lens, the included chime reaches 95dB, and Wi-Fi runs on 2.4GHz and 5GHz with WPA3. Local storage uses a microSD card up to 512GB, not included, which sits in the indoor chime so a thief cannot pull it from the door. Local face recognition can trigger different chimes or lights for known people, with face data kept on the device.

If you are starting fresh and want the fewest boxes, the G410 is the best first buy. If you already own a hub and just need a lock or sensors, other items on this list fit better.

• HomeKit Secure Video and Matter support
• Built-in Zigbee and Matter hub
• mmWave radar and local face recognition
• 2K video, 95dB chime, dual-band Wi-Fi

Best for
iPhone owners wanting Apple Home Key

The Aqara Smart Lock U100 is a fingerprint deadbolt with full Apple Home integration and Apple Home Key support. Tap an iPhone or Apple Watch to unlock, and the listing says this works even when the device has run out of power. Access can be managed and shared through Apple Home.

Beyond Home Key, you get a fingerprint reader for up to 50 fingerprints, one-time local passwords for visitors and remotely configurable passwords through the Aqara Home app, though the remote passwords need an Aqara Zigbee 3.0 hub. A built-in gyroscope powers auto-lock after the door closes, and Do Not Disturb mode mutes lock sounds for set hours. It runs on four included AA batteries for up to eight months, has a USB-C port for emergency power, and the zinc alloy body carries an IP65 rating. Two mechanical keys are in the box. This is the lock for Apple households; the G410 or M3 makes a good partner hub for its extra features.

• Apple Home Key via iPhone or Apple Watch
• Fingerprint reader for up to 50 prints
• Gyroscope auto-lock and Do Not Disturb
• 4 AA batteries, up to 8 months

Best for
Scene triggers on a desk or nightstand

The Aqara Zigbee Wireless Mini Switch is the smallest and simplest device in this group. It is a wireless push button you can program for single press, double press and long press, so one button can dim the lights, start a gaming scene and turn everything off at bedtime. It can also act as an emergency button that sends an alert or sounds the alarm on an Aqara hub, or as a doorbell button with selectable ring tones.

An Aqara hub is required and sold separately, and hubs from other brands are not supported. The listing names Hub M3 among compatible hubs and asks you to keep the switch within 400 inches of it. Treat the mini switch as an add-on once you own the G410, M3 or another Aqara hub, not as a starting point.

• Three programmable press actions
• Emergency alert and doorbell modes
• Works with HomeKit, Alexa and Google Home via hub
• Requires an Aqara hub

Best for
Building a local, Matter-ready Aqara system

The Aqara Smart Home Hub M3 is the backbone for a serious Aqara setup. It supports Aqara Zigbee and Thread devices, acts as a Thread border router and offers Matter bridge functions, so Aqara scenes and signals can sync with Matter ecosystems including Apple Home. As an edge hub, it takes over automations from older Aqara hubs and runs them locally, though the listing notes some cloud notifications still need internet.

Connectivity is generous: dual-band Wi-Fi with WPA3, a Power over Ethernet port and USB-C for a mini UPS or power bank. A 360-degree IR blaster sends and learns remote commands and can turn a traditional IR air conditioner into a Matter device when paired with an Aqara temperature and humidity sensor. There is no microphone or camera, and 8GB of encrypted local storage holds configuration data. If you plan to run many sensors and want fast local automations, this is the hub to pick; if you only want one or two accessories, the G410’s built-in hub may be enough.

• Zigbee, Thread, Matter bridge and Bluetooth
• PoE and dual-band Wi-Fi
• IR blaster with learning and status feedback
• No microphone or camera

Best for
Covering water heater, sinks and washer

The Aqara Water Leak Sensor 3 Pack gives you three Zigbee leak detectors with probes that detect as little as 0.5 mm of water. When one triggers, it sends a phone alert and sounds the local alarm on the Aqara hub, and it can trigger other Aqara devices in an automation. The housings are IP67 rated with a rust-proof coating, batteries are included, and no wiring or screws are needed.

Recommended spots include toilets, water heaters and washing machines, plus kitchen sinks where a countertop espresso machine or dishwasher line could drip unnoticed. As with the mini switch, an Aqara hub is required. Oddly, the hub list in this listing names M2, M1S, E1, G2H Pro, G2H and G3 but not M3; the mini switch listing does include M3, so M3 support is likely, but confirm before building around it. Keep each sensor within about 10 meters of the hub.

• Three sensors, 0.5 mm detection
• Phone alert and hub alarm
• IP67 waterproof housing
• Requires an Aqara hub

Best for
Apple Home climate control with a screen

The Aqara Smart Thermostat W200 with Apple Adaptive Temperature is the deepest Apple integration in this roundup. Through the Apple Home app, Adaptive Temperature uses your iPhone to adjust for home, sleep, away and extended away states, and Clean Energy Guidance nudges temperatures toward cleaner grid times. It connects over Matter 1.4 to Apple Home, Google Home, Alexa and SmartThings, which runs control locally.

The listing says it works with about 85 percent of HVAC systems, including furnaces, air conditioners, heat pumps, boilers and PTAC units. Without a C-wire, you need the Aqara C-Wire Adapter, sold separately. The 4-inch color touchscreen doubles as a front door panel for the G410 or G400 doorbell and the smart lock, and mmWave radar detects presence to adjust temperatures and wake the screen. If you do the wall patching yourself, a cordless nail gun is overkill; a trim plate is included in the box according to the listing.

• Apple Adaptive Temperature and Clean Energy Guidance
• Matter 1.4 local control
• 4-inch touchscreen and mmWave presence sensing
• Door panel for G410/G400 doorbell and lock